AMOLEN's transparent TPU is a see-through flexible filament at 95A shore hardness — it stretches to three times its length and returns to shape, and the clear-tinted base transmits light through printed walls. Phone cases show the device underneath. Flex joints and gaskets reveal their geometry from every angle. At 95A hardness it handles wearable components, grip sleeves, protective covers, and functional flex parts where elasticity and visual clarity through the surface both matter. Print temperature runs 190–220°C with bed temperature optional at 0–60°C.
Available colorways:
Clear Blue — transparent cool blue-tinted filament; walls transmit light with a clean blue cast, most visible in thin-walled prints and flexible components.
Clear Yellow — transparent warm-yellow tint; good color saturation visible through thin walls with the clarity characteristic of the warm-toned options.
Clear Green — transparent green-tinted; mid-spectrum cool tint that reads lighter in thinner walls and deepens in thicker sections.
Clear Red — transparent red-tinted; deeper color presence than the cool-toned clears, with visible saturation at standard wall thicknesses.
Clear Orange — transparent warm orange-tinted; close to amber in character, with visible warmth across standard wall thicknesses.
Technical specifications:
Diameter: 1.75mm ±0.02mm
Print temperature: 190–220°C
Bed temperature: 0–60°C (bed optional)
Layer height: 0.15mm recommended
Shore hardness: 95A
Elongation at break: 3x (stretches to 300% of original length)
Material: TPU (thermoplastic polyurethane) — NOT a PLA material. Transparent base allows tinted color to show through printed walls. Print settings, temperatures, and handling differ from any PLA product in this catalog.
Print speed: Slower print speeds required compared to PLA — reduce feed rate and increase retraction settings. Direct drive extruder recommended; Bowden setups compatible but may require additional tuning to avoid under-extrusion.
Vacuum sealed: Yes — moisture protection for storage
Spool weight: 1KG (2.2LB)
Nozzle: Standard 0.4mm brass compatible
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
