Wood PLA contains 15% real wood fiber, producing prints with visible grain texture, surface porosity, and a natural wood feel that sanding and finishing can push further toward authentic wood appearance. The variety pack includes two configurations of four 200g spools each — the practical way to sample Amolen's full wood PLA range before committing to full-kilogram spools. Note: wood fiber content is mildly abrasive on brass nozzles; a hardened steel nozzle is recommended for sustained printing.
Configuration 1 — Wood Walnut / Cherry Wood / Bamboo Wood / Ebony Black
Four spools. 4×200g = 800g total.
Wood Walnut — warm medium-brown with visible grain texture, replicating the look of walnut hardwood. Strong contrast on detailed surface geometry. Takes light sanding and wood stain well for post-processing.
Cherry Wood — warm reddish-brown with subtle grain variation, replicating the distinctive warmth of cherry hardwood. Clean surface detail on figurines, decorative objects, and display pieces.
Bamboo Wood — pale warm-tan with tight natural grain, replicating the light, even tone of bamboo. Cooler and lighter than walnut, with a more understated natural finish.
Ebony Black — deep near-black tone with faint wood-grain texture, mimicking the dense, rich character of ebony hardwood. High contrast, bold surface presence.
Configuration 2 — Tiger Wood / Cyber Wood / Red Grey Yellow Wood / Purple Pink Yellow Wood
Four spools. 4×200g = 800g total.
Tiger Wood — warm amber-brown base with dark contrasting stripe patterning, replicating the dramatic natural grain of tiger wood.
Cyber Wood — vivid stylized wood grain with non-natural color tones, combining wood PLA fiber texture with an unconventional, eye-catching palette.
Red Grey Yellow Wood — tricolor grain pattern cycling through red, grey, and yellow tones in natural wood-grain distribution.
Purple Pink Yellow Wood — tricolor grain pattern with purple, pink, and yellow tones.
Print Temperature: 180–210°C
Bed Temperature: 30–65°C
Print Speed: <250mm/s
Cooling: On recommended
Drying: 55±5°C for 6–8 hours before use
Diameter: 1.75mm ±0.02mm
Spool size: 4×200g (800g total)
Packaging: Reusable vacuum-sealable bags with desiccant
Material: Wood PLA (15% real wood fiber) — biodegradable, eco-friendly
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
