Unlike dual-color silk where two colors split across opposite sides, AMOLEN's Triple Color Silk PLA runs three distinct colors in a single rotating strand — so every layer of a print cycles through all three in sequence. The silk gloss finish makes each color distinct and light-catching, and the rotation means no two views of the finished piece look identical. Built from biodegradable PLA with high-speed support and a smooth, clog-free feed, it prints like standard silk PLA while producing results that are substantially harder to achieve with single or dual-color filament.
Available colorways:
Blue Green Orange 1KG — ocean blue opens the rotation, transitions through forest green, and closes on a warm burnt orange. The trio moves naturally between cool and warm tones with each layer, creating prints with strong temperature contrast.
Red Yellow Blue 1KG — the primary triad in silk gloss. Vivid red, warm yellow, and clear blue cycle in tight rotation, producing a structured spectrum that reads boldly at any scale and photographs with strong color separation.
Black Blue Purple 1KG — a deep, high-contrast palette where silk-glossy black anchors the strand before transitioning into sapphire blue and closing on rich violet. All three colors stay visually distinct as the print grows in height.
Purple/Blue Green/Burnt Orange 1KG — cool purple and blue-green cycle against a warm burnt orange, creating strong visual tension between the temperature ranges. The contrast makes this one of the most dynamic-looking of the triple-color options on tall prints.
Blue Green Purple 1KG — a cool-spectrum trio moving through sky blue, forest green, and deep violet in rotation.
Red Gold Purple 1KG — vivid red through a metallic gold into deep purple, a warm-to-rich progression with high visual contrast.
Turquoise Coral Gold 1KG — aqua turquoise, warm coral, and bright gold cycle through in a high-energy tropical palette. The three colors are well-separated in tone, so the rotation reads clearly on both small and large prints.
Gold Fuchsia Green 1KG — metallic gold, bold fuchsia, and forest green in a high-contrast, jewel-toned rotation.
Gold Fuchsia Black 1KG — gold and fuchsia set against black. The dark anchor makes the warm metallic and pink tones read with strong contrast on every rotation pass.
Gold Fuchsia Blue 1KG — metallic gold and bold fuchsia paired with a cool sky blue, balancing warm and cool across three distinct tones.
Technical specifications:
Material: PLA (biodegradable, eco-friendly)
Finish: Silk glossy
Diameter: 1.75mm ±0.02mm
Spool weight: 1KG (2.2LB)
Print temperature: 210–240°C
Bed temperature: 30–65°C
Print speed: <200mm/s recommended
Retraction: 0.8–1.2mm at 25–40mm/s
Cooling fan: On
Drying: 55±5°C for 6–8 hours if filament has been exposed to moisture
High-speed printing: supported
Feed quality: no bubbles, no jamming, no warping
Packaging: reusable vacuum-sealable bags
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
