AMOLEN's S-Series is their top-tier silk PLA — each spool runs multiple colors in a continuous spiral sequence along the filament, building sweeping color bands as the print rises. This is not the alternating pattern of standard dual-color silk. The color cycle completes repeatedly from base to top, creating a finished surface that reads as flowing multicolor columns across the entire print. The variety pack contains four full-kilogram spools across two configurations — the production-scale way to sample the S-Series range before running a single color at volume. Four spools, 4KG total.
S Series A — Black Blue Purple / Blue Silver White / Green Blue / Red Black
Black Blue Purple — a deep cool spiral cycling from black through indigo blue into rich purple. High contrast on complex geometry, strong silhouette definition on detailed prints.
Blue Silver White — a cool progression from steel blue through metallic silver into clean white. Reads near-holographic on flat surfaces and slab-style prints under direct light.
Green Blue — a tight spiral shifting between forest green and deep teal. Dark-cool gradient with visible depth under direct or angled lighting.
Red Black — high-contrast spiral cycling from deep red into the silk finish's darkest range. Bold and graphic on display pieces and large-format decorative prints.
S Series B — Black Pink White / Black Red Yellow / Black Blue Purple / Blue Red Yellow Green
Black Pink White — black base breaking into warm pink and clean white in tight rotating sequence. Distinctive contrast on geometric and sculptural forms.
Black Red Yellow — high-energy spiral through black, deep red, and bright yellow. Strong graphic contrast visible through every layer of the print.
Black Blue Purple — the deep cool spiral shared with Series A. Indigo-to-purple cycling against black, equally at home in either configuration.
Blue Red Yellow Green — the widest color range in the S-Series lineup, cycling through four distinct hues in a warm-cool-warm rotation visible on every layer.
Print Temperature: 210–240°C
Bed Temperature: 30–65°C
Print Speed: <200mm/s
Retraction: 0.8–1.2mm at 25–40mm/s
Cooling: On recommended
Drying: 55±5°C for 6–8 hours before use
Diameter: 1.75mm ±0.02mm
Spool size: 4×1KG (4KG total) — transparent spools for at-a-glance color and quantity visibility
Packaging: Reusable vacuum-sealable bags with desiccant
Material: Silk PLA — biodegradable, eco-friendly
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
