AMOLEN's S-Series is a spiral multicolor silk PLA — each spool contains a single filament strand that transitions through multiple colors in a fast, repeating sequence. Every layer of your print captures a different point in the color rotation, producing a layered multicolor shift that looks intentional and complex without any extra setup. The silk finish gives the surface a metallic sheen that deepens color contrast and holds visual interest under light. High-speed printing is supported on any standard FDM printer.
Available colorways:
Blue Red Yellow Green — a full primary-and-secondary rotation through all four hues, producing a saturated, high-energy multicolor band across every layer.
Red White — high-contrast two-tone spiral; the white amplifies the red's vibrancy on each transition, producing a bold alternating pattern.
Berry Pop — warm pinks and berry tones in the rotation; a soft, organic gradient that reads as distinctly warm and inviting.
Nebula Ribbon — a space-inspired blend; cool blues, deep purples, and dark teals cycling through the spiral rotation.
Black Red — tight high-contrast spiral; black deepens the red's intensity, producing a bold finish with strong visible directionality on the layer lines.
Black Red Yellow — three-tone high-energy spiral; yellow introduces a warm break in the black-red contrast for a more graphic, saturated look.
Blue Pink White — a three-tone blend cycling through blue, pink, and white; the white provides contrast to both cooler and warmer tones.
Black Turquoise Magenta — three-tone dark-and-vivid spiral; black grounds the turquoise and magenta, producing punchy color against a dark base.
Black Pink White — three-tone combination alternating dark and light; the white and black create high contrast framing around the pink.
Blue Pink Green — three-tone light-spectrum blend.
Technical specifications:
Diameter: 1.75mm ±0.02mm
Print temperature: 210–240°C
Bed temperature: 30–65°C
Print speed: <200mm/s recommended
Drying: 55±5°C for 6–8 hours if filament has been exposed to moisture
Material: Biodegradable PLA with silk finish; single-strand spiral multicolor (colors transition in a repeating sequence along the length of the strand — not blended, but alternating)
Color transition behavior: Transition rate is determined by print speed and layer height. Faster printing and taller layer heights produce longer color bands. Slower speeds and finer layers produce tighter, more frequent transitions.
Silk finish behavior: Metallic sheen throughout; temperature sensitivity slightly higher than standard PLA — standard for silk-finish materials.
High-speed printing: Supported
Packaging: Reusable vacuum-sealable bag; moisture protection between sessions
Spool weight: 1KG (2.2LB)
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
