Dual-color silk PLA contains two colors within a single strand — as the filament prints, both colors rotate and alternate across the surface, producing a two-tone shift effect without any splicer or color-change configuration. The AMOLEN Silk Dual Color Variety Pack gives you five different dual-color pairings to sample at 200g each before committing to a full kilogram of any single combination. Four spools per pack, 800g total — test the color dynamics and finish behavior of multiple pairings in one order.
Dual C — Black Blue / Black Purple / Black Green / Black Red (4 spools × 200g)
Black Blue 200g — deep black on one side, cool blue on the other. The contrast creates a high-depth effect across print layers, with the blue emerging strongly under light.
Black Purple 200g — dark anchor with an iridescent purple that shifts visibly as print orientation changes. Strongest on curved surfaces where the two colors alternate across the form.
Black Green 200g — black and vivid green create a bold two-tone finish. The green reads especially bright against the dark base in silk's characteristic metallic light response.
Black Red 200g — warm red against a deep dark base, each color rotating across the strand as it prints. High contrast in both daylight and under directional light.
Dual D — Blue Green / Blue Green Coral / Blue Green Dark-Violet / Purple Green (4 spools × 200g)
Blue Green 200g — a cool-toned combination where blue and green merge into a shifting sea-toned finish as the strand rotates through each layer.
Blue Green Coral 200g — cool blue-green base meets warm coral on the opposite side. Strong color temperature contrast between the two tones; each layer reads differently depending on viewing angle.
Blue Green Dark-Violet 200g — cool blue-green paired with deep violet on the other side, creating a dramatic split between the two half-tones across the print surface.
Purple Green 200g — a complementary contrast pairing that shifts across the cool-warm boundary as the filament moves through the nozzle.
Dual A — Red Gold / Red Green / Blue Green / Red Blue (4 spools × 200g)
Red Gold 200g — warm accent pairing where red and gold rotate together on a single silk strand, both tones catching metallic light differently.
Red Green 200g — complementary contrast: red and green on one filament, shifting across the print surface with each layer.
Blue Green 200g — a cool-toned pairing where two adjacent hues blend smoothly as the strand rotates.
Red Blue 200g — strong primary contrast where the two colors create a bold visual shift across print layers.
Dual B — Black Silver / Black Gold / Red Blue / Green Blue (4 spools × 200g)
Black Silver 200g — high-contrast metallic pairing: deep black on one side, reflective silver on the other.
Black Gold 200g — dark anchor with a warm gold accent that picks up light on the silk surface.
Red Blue 200g — strong primary contrast with the characteristic silk metallic finish rotating across print layers.
Green Blue 200g — cool-spectrum blend shifting from vivid green to rich blue as the strand rotates.
Dual E — Gold Silver / Red Silver / Blue Silver / Green Silver (4 spools × 200g)
Gold Silver 200g — both metallic tones on one strand, delivering a continuous high-sheen finish across the entire print.
Red Silver 200g — warm red contrasting a cool, mirror-bright silver within a single filament.
Blue Silver 200g — cool blue transitions to reflective silver as the strand rotates through layers.
Green Silver 200g — fresh green tone paired with clean silver, both expressing the full metallic silk sheen.
Material: Silk PLA — biodegradable, US-sourced raw materials
Diameter: 1.75mm ±0.02mm
Spool contents: 4 spools × 200g = 800g total per pack (each spool is 200g, not 1KG)
Print temperature: 210–240°C
Bed temperature: 30–65°C
Print speed: <200mm/s
Retraction: 0.8–1.2mm at 25–40mm/s
Cooling fan: On
Drying: 55±5°C for 6–8 hours before use if stored open
Packaging: Reusable vacuum-sealable bags — moisture protection included
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
