PLA Silk Dual Color Filament 1.75mm, 1KG/2.2LB

Each spool of AMOLEN's Dual Color Silk PLA carries two distinct silk-finish tones — one on each side of the filament strand. As the material extrudes, the two colors rotate and shift across every layer, producing a metallic two-tone finish without any extra steps. The result is a glossy, light-reflective surface that shifts under different viewing angles and photographs exceptionally well. It runs at high speed on any standard FDM printer without sacrificing the silk surface quality.

Available colorways:

Red & Black — bold high-contrast pairing; red's warmth against black's depth creates a graphic, two-tone effect.

Black & Orange — high-visibility pairing; the black grounds the orange's intensity, producing a striking graphic finish well-suited for cosplay and display work.

Blue Green — cool-toned pairing; the two hues blend and separate depending on print angle and lighting, producing a teal-to-cobalt shift.

Black & Gold — warm metallic pairing; gold's sheen against black silk reads as a premium finish, appropriate for display pieces and props.

Black & Pink — sharp contrast between near-matte black and warm silk pink; the color rotation is most visible on curved surfaces and circular geometries.

Sky Blue & Pink — softer dual-tone pairing; the pastel color rotation is lighter in character than the bold-contrast options, good for decorative and fashion-adjacent builds.

Blue Green & Dark Violet — a cool-spectrum two-tone; the violet deepens the blue-green base, producing an ocean-to-twilight layered effect across the print.

Black & Silver — neutral metallic pairing; silver's sheen against black silk produces a polished, monochrome finish that holds up well in both display and functional contexts.

Black Blue — close-value pairing; subtle tonal shift from dark blue to near-black; understated metallic effect for builds that call for depth without strong contrast.

Black & Purple — a deep rich pairing.

Technical specifications:

Diameter: 1.75mm ±0.02mm

Print temperature: 210–240°C

Bed temperature: 30–65°C

Print speed: <200mm/s recommended

Drying: 55±5°C for 6–8 hours if filament has been exposed to moisture

Material: Biodegradable PLA with silk coating; dual-color strand (two colors per side of filament — colors rotate during extrusion)

Silk behavior: Metallic sheen is consistent throughout the spool; color distribution shifts based on layer height and orientation. Note: silk PLA is slightly more temperature-sensitive than standard PLA — dial in temperature before a full print run.

High-speed printing: Supported

Packaging: Reusable vacuum-sealable bag; moisture protection between sessions

Spool weight: 1KG (2.2LB)

🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.