Not sure which silk color to commit to? The AMOLEN Silk PLA Variety Pack puts five distinct metallic colorways in a single order — each as a 200g sample spool so you can test the sheen, the finish behavior, and how each color photographs before pulling the trigger on a full kilogram. Four spools per pack, 800g total.
Silk A — Bronze / Red Copper / Silver / Metal Gold
Warm metallic tones from burnished bronze to clean silver to rich metal gold. Red Copper lands between them with a warm, shifted hue. This pack covers the precious-metal end of the silk palette — strong for trophies, display pieces, and architectural models.
Silk B — Black / Red Copper / Purple / Neon Green
High-contrast combination with a dark anchor. Black silk provides deep reference; Red Copper adds warmth; Purple goes cooler and iridescent; Neon Green delivers maximum visual pop. A strong set for display prints, cosplay props, and pieces that need to command attention.
Silk C — White / Sakura Pink / Neon Green / Baby Blue
Pastel and bright. White silk catches every shift in ambient light. Sakura Pink offers a soft warm blush. Neon Green punches high on the saturation scale. Baby Blue stays cool and airy. This pack suits figurines, decorative pieces, and spring-palette projects.
Silk D — Black / Purple / Silver Grey / Sapphire Blue
Cool-toned and sophisticated. Black and Silver Grey provide clean anchors. Sapphire Blue delivers a deep, jewel-toned shift under light. Purple connects the two blues with rich mid-range depth. Strong for display pieces where the finish is part of the design.
Silk E — Black / Red / White / Skin
Foundation colors in silk. Black and White give clean reference points for evaluating sheen behavior across your setup. Red delivers classic vibrancy. Skin tone is practical for figures, props, and flesh-toned accent parts.
Material: Silk PLA — biodegradable, US-sourced raw materials
Diameter: 1.75mm ±0.02mm
Spool contents: 4 spools × 200g = 800g total per pack (each spool is 200g, not 1KG)
Print temperature: 210–240°C
Bed temperature: 30–65°C
Print speed: <200mm/s
Retraction: 0.8–1.2mm at 25–40mm/s
Cooling fan: On
Drying: 55±5°C for 6–8 hours before use if stored open
Packaging: Reusable vacuum-sealable bags — moisture protection included
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
