AMOLEN's Glow-in-the-Dark PLA Variety Pack lets you sample multiple glow colorways before committing to full 1KG spools — four 200g spools per pack, 800g total. Every spool recharges under UV light or direct sunlight in 30 minutes and emits a continuous glow that can be repeated indefinitely. Three pack configurations cover different combinations of glow colors, so you can test both the daylight tone and the dark emission output of each spool before scaling up.
Rainbow/Green/Blue/Purple — New Version (4 spools × 200g)
The current production run of the Rainbow/Green/Blue/Purple configuration.
Rainbow 200g — multicolor gradient daylight appearance; color segments shift every 5 meters. Glow emission follows the color blend, producing a spectral shift pattern across the strand.
Green 200g — classic phosphorescent green in daylight; consistent green glow emission, the most recognized glow-in-the-dark tone.
Blue 200g — cool blue in daylight; blue glow emission, consistent with daylight color.
Purple 200g — violet/purple in daylight; purple glow emission, consistent with daylight color.
Rainbow/Green/Blue/Purple — Old Version (4 spools × 200g)
Contains the same four colorways as the New Version: Rainbow, Green, Blue, and Purple — each at 200g. Both packs are identical in contents. New Version is the current production run.
Firefly Blue/Orange/Green/White (4 spools × 200g)
Firefly Blue 200g — rich medium-blue in daylight; cool blue-white glow emission.
Orange 200g — warm orange in daylight; amber-toned glow emission, strong contrast against dark backgrounds.
Green 200g — classic phosphorescent green in daylight; consistent green glow emission.
White 200g — neutral off-white in daylight; strong, clean blue-white glow output. The most versatile glow color for multi-piece displays and builds where a neutral base is needed.
Material: Biodegradable PLA with 20% phosphorescent glow powder
Diameter: 1.75mm ±0.02mm
Spool contents: 4 spools × 200g = 800g total per pack (each spool is 200g, not 1KG)
Glow charge time: 30 minutes under UV light or direct sunlight
Glow behavior: Continuous emission; rechargeable and repeatable — not a single-use effect
Color segment length: 5 meters per color on Rainbow spools
Print temperature: 210–230°C
Bed temperature: 30–65°C
Print speed: <120mm/s recommended
Drying: 55±5°C for 6–8 hours before use if stored open
Surface finish: Phosphorescent particles produce a slightly textured surface compared to standard PLA — expected and normal for glow-in-the-dark materials
Nozzle: Standard 0.4mm brass compatible; phosphorescent particles are mildly abrasive — monitor nozzle wear during extended printing
Packaging: Reusable vacuum-sealable bags — moisture protection included
🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.
