PETG Pink Star Stuff PETG Filament 1.75mm, 1kg

Cookiecad PETG is a step up from PLA for functional and structural applications — tougher, more impact-resistant, and more chemically resistant than standard PLA, with better temperature performance and strong layer adhesion. PETG is not biodegradable.

Pink Star Stuff is a translucent PETG with a pink tint and silver glitter dispersed through the strand. The clear-based formulation allows the glitter to scatter light visibly from every angle, producing a dimensional sparkle effect on the finished surface. Note on glitter filaments: glitter PETG has a higher chance of clogging than standard PETG. A direct drive extruder and a 0.4mm or larger nozzle are recommended.

Print Specifications

Print Temperature: 220–245°C (run a temperature tower to dial in your specific setup — different colorways and printer configurations may vary)

Bed Temperature: 75–90°C (textured PEI build plate recommended)

Cooling: Standard PLA cooling settings; reduce by up to 50% if layer adhesion is weak

Filament Diameter: 1.75mm

Spool Weight: 1KG

Note: PTFE-lined hotends should not exceed 240°C. All-metal hotend recommended for sustained printing above 240°C.

🌵 Why Buy from VectorDesignsArizona?
We run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As a verified Shopify Collective partner, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.