{"product_id":"pla-glow-in-the-dark-variety-pack-4x200g","title":"PLA Glow in the Dark Variety Pack (4x200g)","description":"\u003cp\u003eAMOLEN's Glow-in-the-Dark PLA Variety Pack lets you sample multiple glow colorways before committing to full 1KG spools — four 200g spools per pack, 800g total. Every spool recharges under UV light or direct sunlight in 30 minutes and emits a continuous glow that can be repeated indefinitely. Three pack configurations cover different combinations of glow colors, so you can test both the daylight tone and the dark emission output of each spool before scaling up.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRainbow\/Green\/Blue\/Purple — New Version (4 spools × 200g)\u003c\/strong\u003e\u003cbr\u003e\nThe current production run of the Rainbow\/Green\/Blue\/Purple configuration.\u003cbr\u003e\nRainbow 200g — multicolor gradient daylight appearance; color segments shift every 5 meters. Glow emission follows the color blend, producing a spectral shift pattern across the strand.\u003cbr\u003e\nGreen 200g — classic phosphorescent green in daylight; consistent green glow emission, the most recognized glow-in-the-dark tone.\u003cbr\u003e\nBlue 200g — cool blue in daylight; blue glow emission, consistent with daylight color.\u003cbr\u003e\nPurple 200g — violet\/purple in daylight; purple glow emission, consistent with daylight color.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRainbow\/Green\/Blue\/Purple — Old Version (4 spools × 200g)\u003c\/strong\u003e\u003cbr\u003e\nContains the same four colorways as the New Version: Rainbow, Green, Blue, and Purple — each at 200g. Both packs are identical in contents. New Version is the current production run.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFirefly Blue\/Orange\/Green\/White (4 spools × 200g)\u003c\/strong\u003e\u003cbr\u003e\nFirefly Blue 200g — rich medium-blue in daylight; cool blue-white glow emission.\u003cbr\u003e\nOrange 200g — warm orange in daylight; amber-toned glow emission, strong contrast against dark backgrounds.\u003cbr\u003e\nGreen 200g — classic phosphorescent green in daylight; consistent green glow emission.\u003cbr\u003e\nWhite 200g — neutral off-white in daylight; strong, clean blue-white glow output. The most versatile glow color for multi-piece displays and builds where a neutral base is needed.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Biodegradable PLA with 20% phosphorescent glow powder\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75mm ±0.02mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpool contents:\u003c\/strong\u003e 4 spools × 200g = 800g total per pack (each spool is 200g, not 1KG)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGlow charge time:\u003c\/strong\u003e 30 minutes under UV light or direct sunlight\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGlow behavior:\u003c\/strong\u003e Continuous emission; rechargeable and repeatable — not a single-use effect\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eColor segment length:\u003c\/strong\u003e 5 meters per color on Rainbow spools\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint temperature:\u003c\/strong\u003e 210–230°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 30–65°C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint speed:\u003c\/strong\u003e \u0026lt;120mm\/s recommended\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrying:\u003c\/strong\u003e 55±5°C for 6–8 hours before use if stored open\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface finish:\u003c\/strong\u003e Phosphorescent particles produce a slightly textured surface compared to standard PLA — expected and normal for glow-in-the-dark materials\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNozzle:\u003c\/strong\u003e Standard 0.4mm brass compatible; phosphorescent particles are mildly abrasive — monitor nozzle wear during extended printing\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e Reusable vacuum-sealable bags — moisture protection included\u003c\/p\u003e\n\n\u003cp\u003e🌵 \u003cstrong\u003eWhy Buy from VectorDesignsArizona?\u003c\/strong\u003e\u003cbr\u003e\nWe run a large and growing 3D print farm out of Tucson, Arizona — and the filaments we carry are the ones loaded in our own machines. As an authorized reseller, we only sell what we've personally used and relied on. Every material in our store has been tested in real production runs, not just sampled. When we recommend a filament, it's not a sales pitch, it's what's actually running through our printers right now.\u003c\/p\u003e","brand":"Amolen","offers":[{"title":"Rainbow\/Green\/Blue\/Purple Old Version","offer_id":50203624505537,"sku":"#1-3DGLOWSET-old","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Rainbow\/Green\/Blue\/Purple New Version","offer_id":50203624538305,"sku":"#1-3DGLOWSET","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Firefly Blue\/Orange\/Green\/White","offer_id":50203624571073,"sku":"#1-3DPLAGIDRDORWHGN","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0526\/3881\/0305\/files\/323ce87292c67d5aa00f6189d0d5fefd.jpg?v=1778540665","url":"https:\/\/vectordesignsarizona.com\/products\/pla-glow-in-the-dark-variety-pack-4x200g","provider":"VectorDesignsArizona","version":"1.0","type":"link"}